Skip to content

Dose, Yield and Time: The Three Numbers of a Shot

Dose, yield and shot time are the three numbers people write down for an espresso shot. Here's what each one is and how they connect.

Reviewed on November 18, 2026

Every espresso shot comes down to three numbers: how much coffee went in, how much liquid came out, and how many seconds it took. Once you know them, you can describe and repeat a shot.

Dose

The dose is the weight of the ground coffee in the basket, the small metal cup that holds the grounds in the portafilter handle. One reference says baskets come in single, double and triple sizes, each using a proportional amount of ground coffee.1

Why does the dose matter? Because everything else is measured against it. A ratio compares the yield to the dose, so a dose that wanders makes the ratio wander too. You'll find the sums in how to work out a ratio.

Yield

The yield is the weight of the espresso in the cup. It's the output. You can weigh the cup before and after, or put the cup on a scale and zero it first, then read the number when the shot ends.

Some people only watch the clock and judge by eye. That's a fair start, but it hides a lot. The page on why weigh the shot goes into the reasons.

Time

The shot time is how long the espresso takes to flow. One source says a normal serving of espresso takes from 18 to 30 seconds to pull.2 Another says a ristretto is extracted in from 20 to 30 seconds using half as much water.3

Those figures overlap, which tells you that time is a range and not a target. Many scales have a built-in timer. One maker's scale has a square button that turns the timer on and off.4

How the three numbers linkDose: grams of dry coffeeRun the shot and watch the clockYield: grams of liquid in the cupTime: seconds from start to stop
Dose goes in, yield comes out, and time says how long it took.

How they push on each other

The three numbers don't live alone. Change one and the others tend to move.

  • Grind size is one lever. One reference notes the grind is adjusted, finer for ristretto and coarser for lungo, to reach a target volume.1
  • Tamping, which means pressing the grounds flat with a tool, helps water move evenly through them.1
  • Extraction time depends on the variety of coffee beans, and on the grind and the pressure of the machine.2

The sources don't promise a fix every time. They show which levers exist, and you learn how they behave on your own machine by changing one at a time.

Writing the three down

A simple note might read: dose, yield, time, and one line on taste. Even a scrap of paper works. When a shot tastes good, you've got the numbers to aim for next time. When it doesn't, you've got a place to start changing things, one number at a time.

A common slip is changing the grind and the dose together. Then you can't tell which change did what. Move one thing, pull a shot, and write down the result.

Notes and sources

  1. Espresso, Wikipedia
  2. Lungo, Wikipedia
  3. Ristretto, Wikipedia
  4. Half Decent Scale, Decent Espresso